SOLIDS/SLURRY

	Hydra-Cell	Positive Displacement Sealless Hi PSI Pumps, able to handle aggressive chemicals and abrasives without damage, has the ability to run dry Applications Include: Hot glycol injection, water transfer, condensate injection, chemical injection, caustic soda wash down, pumping slurry for SO2 removal/acid neutralization, solvents for parts washing, lawn fertilizers and chemicals, and Lime Slurrys Capacity .2 gpm up to 37 gpm, Pressures 30 psi up to 2500 psi
	Leistritz	2, 3, and 5 Rotor Screw Pumps for Power Generation, Chemical Process, Oil & Gas and Marine Heads up to 2,300 psi, Capacity up to 8,000 gpm Special Features/Benefits Low pulsation for smooth, quiet operation. Direct-drive for design and operational simplicity. Low shear for protection of the pumped fluid. Hydraulic balance for minimal deflection and wear. Cartridge-type rotating assembly for easy servicing. Integral relief valve to eliminate external valves and piping. Built-in heat jacket to facilitate cold start. Customized ports to adapt to the best piping arrangements for the system. Selection of materials for the longest service life.
	Ritz Atro	Archimedean Screw Pumps two and three gage spiral helix pumps (up to 12 ft diameter), available in carbon steel or alloy steel and a packaged “compact” design. Troughs available in steel or concrete. Features a ECO maintenance free bearing which can be retrofitted to existing units. Flows up to 60,000 gpm, Heads up to 30 ft
	Toyo	Submersible Centrifugal Slurry Agitator Pumps sizes up to 22” discharge. Applications include Heavy Duty Slurry, Mining, Dredging, Slag Pits; Solids to 75%. Available with either electric or hydraulic drives. Flows up to 21,000 gpm Horizonal, Hard Metal, Heavy Duty Slurry Pumps sizes up to 8” discharge, available in high chrome or duplex stainless steel, high efficiency closed impeller or fully recessed impeller. Flows up to 4,500 gpm, Heads up to 570 ft High Pressure Hose Diaphragm Piston Pumps for use in high pressure abrasive/corrosive slurry applications such as sulphuric acids, phosphorus slurries, tar, coke, coal slurries, magnesium pump, sewage sludges, and titanium dioxides. Flows up to 4,000 gpm, Heads up to 3,000 psi Vertical Cantilever Pumps sizes up to 10” discharge. Available with recessed, closed, or open impellers. Features no submerged bearings or seals. Available with or without agitator and chopper options. Pumps can be belt driven or direct drive. Flows up to 5,000 gpm Veritcal Lineshaft Slurry Pumps sizes up to 14” discharge. Available with recessed or closed impellers and various shafts, bearings, and seal configurations to meet the application. Available with or without agitator and chopper options. Pumps can be belt driven or direct drive. Flows up to 7,500 gpm
	Verderflex	Industrial Peristaltic Hose Pumps for heavy-duty applications. Features specially designed hose construction to postpone fatigue resulting in longer service life of the hose, close coupled or robust long coupled design, rigid pump housing designed for heat dispersion and strength, simplified hose connection for easier maintenance and disaster proof pump design, channels for complete drainage prior to maintenance, can handle up to 80% solids. Applications: Abrasive and highly corrosive products, shear sensitive products, high viscous products, crystallization products, dosing, self-priming, mining, explosives. Flows up to 20 gpm, Heads up to 145 psi
	Weatherford	Progressive Cavity Pumps for a wide range of fluid viscosities. Features simple installation, operation, and maintenance, product remains unchanged during pumping process, high resistance to abrasion and corrosion, minimal noise, and low energy consumption. Applications: Wastewater & sludge, food & beverage, biotech, paints & glues, oil & gas, chemicals, plastics, shear-sensitive slurries, heavy pastes and abrasive fluids. Flows up to 1,690 gpm